Suspended pull-outs are attached directly to shelf uprights for optimal use of floor space in height
for the installation of suspended pull-outs
Shelf heights: 2.000 | 2.500 mm
Optional: add-on shelves
for storage on pallets
Load capacity: 600 kg
Pull-out: approx. 70 % | 100
for direct storage of small parts
Load capacity: 200 kg
Pull-out: approx. 70 % | 100
To make the best use of floor space in height, our suspended pull-outs have been developed. These pull-outs are attached to the shelf uprights. Additional cross beams under the pull-outs are not required. The suspended pull-outs are suitable for loads up to 600 kg.
The suspended pull-outs can be individually combined with our shelving elements. In this way, different shelf types can be configured in the production process depending on the application.
Here is an example with 4 shelving fields, some of which have been equipped with different pull-outs and accessories. The big advantage of the suspended pull-outs is always the low space requirement in the height, because no cross beams are needed.
The special design of the pull-outs results in a low installation height of the pull-outs. Since no additional cross beams are required, the shelf space is optimally utilized in terms of height. Therefore, more drawers can be installed at picking height and the available floor space is optimally used!
